ISO 20289:2025

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٠٢ يونيو ٢٠٢٥

Surface chemical analysis — Total reflection X-ray fluorescence analysis of water

ملفات الوثيقة ISO 20289:2025

الإنجليزية 19 صفحات
الإصدار الحالي
166.31 USD

مجال الوثيقة ISO 20289:2025

This document specifies a chemical method for technicians working with total reflection X-ray fluorescence (TXRF) instrumentation to perform measurements of water samples, according to good practices, with a defined degree of accuracy and precision. Target users are identified among laboratories performing routine analysis of large numbers of samples, which also conform with ISO/IEC 17025.

This document specifies a method to determine the content of elements dissolved in water (e.g. drinking water, surface water and ground water). This document is also applicable for determining elements in waste waters and eluates, taking into account the specific and additionally occurring interferences. This document does not specify sampling, dilution and pre-concentration methods.

Elements determined using the method specified in this document can depend on the X-ray source of the instrument. This document does not specify health, safety or commercial aspects.

The determinable concentrations depend on the matrix and the interferences encountered. In drinking water and relatively unpolluted waters, the limit of quantification lies between 0,001 mg/l and 0,01 mg/l for most of the elements. The range of concentrations typically lies between 0,001 mg/l and 10 mg/l, depending on the element and predefined requirements.

Annex A reports an example of uncertainty calculation. Annex B provides an example report on validation of the method for TXRF analysis of water performed with instrumentation that has Mo as the X-ray source and uses Ga as the internal calibration standard.

Limits of quantification of most elements are affected by blank contamination and depend predominantly on the laboratory air-handling facilities available, on the purity of reagents and the cleanliness of labware.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
YSMO GSO 150-2:2020
GSO 150-2:2013 
لائحة فنية يمنية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
YSMO GSO 2055-1:2020
GSO 2055-1:2015 
مواصفة قياسية يمنية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO 1952:2025
 
مواصفة قياسية دولية
Coal — Determination of extractable metals in dilute hydrochloric acid
ISO 5834-1:2025
 
مواصفة قياسية دولية
Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 1: Powder form
ISO 5834-3:2025
 
مواصفة قياسية دولية
Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 3: Accelerated ageing methods after gamma irradiation in air
ISO 15238:2025
 
مواصفة قياسية دولية
Coal — Determination of total cadmium